In short
The ILP's Lux and the City event looks at safer places after dark. How to plan recessed downlights for entrances, canopies and soffits.

On the evening of Thursday 26 November, the ILP's Architectural Lighting Committee hosts Lux and the City in London, exploring "the role that lighting can play in creating safer, more inclusive and welcoming places after dark". Speakers include Graham Festenstein of Graham Festenstein Lighting Design, Jess Gallagher of Groupe Ragni UK and academic Karen Whybro (Lighting Journal).
The event is about streets and public spaces, but the same question applies at the threshold of every building. Entrances, canopies and soffits are where people arrive and leave in the dark, and where a building first shows how welcoming it is. Recessed downlights are often the right tool. This guide covers how to plan them.
Why entrances matter after dark
In winter, many people arrive at and leave work, hotels, shops and homes in the dark. A well-lit entrance helps people:
- Find the door and understand where to go
- See faces of people approaching or waiting
- Move safely over steps, ramps and level changes
- Read signs and door entry panels
- Feel welcome, rather than exposed
Where recessed downlights work
| Location | What it needs | Downlight approach |
|---|---|---|
| Entrance canopy | Light on the door and threshold | Recessed downlights in the canopy soffit |
| Recessed doorway | Even light on faces and the entry panel | Small downlights in the reveal or soffit |
| Colonnade or covered walkway | Even light along the route | Regular spacing with wide beams |
| Steps and ramps | Clear view of edges | Downlights placed to light treads, plus step lights |
| Drop-off and loading areas | Light for vehicles and pedestrians | Robust, higher-output downlights |
| Lobby inside the door | A gentle transition from outside | Dimmable downlights to balance with outdoor levels |
Choosing external downlights
IP rating
Soffits and canopies are exposed to wind-driven rain and damp. Check that the downlight's IP rating suits the location and that the manufacturer approves it for exterior soffits. See IP ratings for recessed downlights.
Materials and finish
Choose finishes and fixings suited to outdoor use, especially near the coast or in polluted urban areas. Match the trim colour to the soffit, so fittings disappear by day.
Beam and glare
People look up as they approach a door. Deep-set, low-glare optics avoid dazzling them. Wider beams suit canopies and walkways, while narrower beams can pick out a door or sign. See beam angles and glare and UGR.
Colour temperature and CRI
Warm or neutral white with good colour rendering helps faces look natural. Keep the colour temperature consistent with the lobby inside, so the transition feels smooth. See colour temperature and CRI.
Light faces, not just floors
Downlights placed directly over people can cast hard shadows on faces. Set them slightly in front of the door, or combine downlights with wall lighting, so faces and entry panels are lit from the front. Light on surrounding walls also makes the entrance easier to read from a distance.
Balance inside and outside
At night, a brightly lit lobby next to a dark canopy can make the outside feel darker. Balance the two:
- Dim lobby lighting in the evening, where the building allows
- Use controls to switch or dim external lighting by time or daylight. See recessed lighting controls
- Avoid over-lighting, which wastes energy and adds light spill
Emergency lighting
Exits and the routes leading away from them need emergency lighting. Consider this with the canopy design, so emergency fittings are integrated rather than added later. See emergency lighting with recessed downlights.
Respect the night
Good external lighting puts light where it is needed and limits spill into the sky and neighbouring windows. Recessed downlights in a soffit naturally point downwards, which helps. Avoid unnecessarily high output and switch lighting off or dim it when the building is closed, where security allows.
Practical points
- Void depth. Canopy soffits are often shallow. Check the space above the soffit before choosing a fitting. See ceiling void depth
- Cut-outs. Coordinate cut-out positions with soffit panel joints. See cut-out sizes
- Maintenance. Plan access for cleaning and replacement, especially over steps
- Electrical work. External circuits must be designed and installed to BS 7671 by a qualified electrician
By building type
Offices
Entrances set the first impression for staff and visitors. Combine canopy downlights with lighting in the reception. See reception lighting design and recessed lighting for offices.
Hotels and hospitality
Hotel entrances need to feel welcoming at every hour. See recessed lighting for hospitality.
Retail
Shop entrances and covered walkways should be bright enough to draw people in without glare. See recessed lighting for retail.
Healthcare and education
Hospital and school entrances are used by people of all ages and abilities, often in the dark. See healthcare and education.
A quick checklist
- Map routes from the street or car park to the door
- Choose downlights with suitable IP ratings and finishes
- Light faces, entry panels and steps, not just the floor
- Balance external and lobby lighting
- Plan controls and emergency lighting
- Keep spill and glare to a minimum
How 299 Lighting can help
299 Lighting has supplied architectural lighting since 2009. Browse our recessed lighting and downlights, read about our services and project support, or send us your drawings. For linear options in entrance soffits, see linear-led.com on reception area lighting, and for plaster-in details, see trimlesslighting.com on receptions.
Further reading at 299 Lighting
Next steps on recessedlighting.co.uk
Planning a recessed scheme?
Send us your reflected ceiling plan. We'll come back with a product shortlist, ceiling cut-out details and lighting calculations.
Start a project →Frequently asked questions
When is Lux and the City?
The ILP event takes place on the evening of Thursday 26 November at Anomalous (The Home), 36 Pentonville Road, London.
Can recessed downlights be used in external canopies?
Yes, if they have an IP rating suitable for the location and the manufacturer approves them for exterior soffits.
Where should downlights go at an entrance?
Slightly in front of the door, so faces and entry panels are lit from the front, with even spacing along covered routes.
Do entrances need emergency lighting?
Exits and escape routes need emergency lighting. Plan it with the canopy design so fittings are integrated.


